Skip links

High Torque Auger Power Head

High Torque Auger Power Head

In any drive head, there is a tradeoff between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque (power) to the auger at a slower speed. The high torque (power) translates into the Dingo’s capability to dig 30″ (76.2 cm) holes up to 6′ (1.8 m) deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.

Manufacturer

Toro

Auger Speed

57 RPM @ 11 GPM, 95% efficiency

Height

22 in

Length

24 in

Shaft

2-9/16 in. round

Torque

1515 ft-lb @3000 PSI @ 11 GPM

Weight

182 lbs

Width

24 in

Key Features and Options

  • Front to back directional pivot provides the operator with exceptional control when digging with large augers. The single directional pivot prevents the auger from kicking left to right and reduces flailing.
  • Horizontal Lockout: The head locks in the horizontal position for usage with the Toro Cement Bowl, Capstand Adapter and more.
  • The high torque drive provides a tremendous 1515 ft-lbs of torque at 3000 PSI with a bit speed of 57 RPM to break through the toughest ground.
  • The plantetary gear drive provides high speeds and maximum torque to the auger, while transmitting minimal stress on the auger head components. The planetary gear drive insures the longevity of the hydraulic motor.

Accessories

Auger Bits

6 in, 9 in, 12 in, 15 in, 18 in, 24 in, or 30 in

Cement Bowl

Haul, mix, and pour up to 200 lbs (dry) cement

Carbide Teeth & Pilot

Wisdom or Chisel tooth, Hard face Pilot