The SP5014 series is a four-wheeled self-propelled unit designed to deliver maximum cutting power in hard to get to areas. A unique dual speed ground system allows the SP5014 to travel faster than any other stump cutter on the market today.
The unit also boasts a 1 1/4-inch thick, 21-inch diameter cutting wheel, letting you grind faster and smoother than ever before. The SP5014 Stump Cutter features heavy-duty construction (1,650 pounds), hydraulic steering and four-wheel stance. This combination offers unmatched stability and maneuverability.
This compact machine has a width of 35 inches, allowing it to fit easily through standard backyard gates. The SP5014 incorporates many of the features found in larger J.P. Carlton models including a direct drive hydraulic pump, hardened bushings and shafts, counter balance valves on the lift, swing and hydraulic drive circuits.
The SP5014 series is available with a variety of engine options including: a 27-horsepower Kohler Engine and 35-horsepower Vanguard. With its wide range of features and dependable construction, the SP5014 is designed to maximize production and profits, while minimizing downtime.
| Engine options | 35 HP Vanguard Big Block 993 CC | | Cutter depth below ground | 14″ | | Cutter height above ground | 34″ | | Cutter head swing | 50″ | | Tongue extension | 30″ | | Cutter wheel thickness | 1 1/4″ | | Number of teeth on cutter wheel | 36 Razor Teeth | | Type of Cutter Teeth | Hard Micro Structure Carbide | | Jack shaft bearings | 1 11/16″ | | Cutter wheel bearings | 1 11/16″ | | Chip containment volume | 16 cu. ft. | | Fuel tank capacity | 10 gallons | | Hydraulic tank capacity | 4 gallons | | Ground Pressure | 8.6 PSI | | Tire size | 5.7 x 8 | | Machine width | 48″ with duals – Wide Stance 35″ – Narrow Stance | | Machine height | 58″ | | Machine length | 108″ | | Total weight | 1650 lbs. | | Paint | Dupont Imron with epoxy Primer | | --- | | |