The self-propelled HB19 is compact and surprisingly powerful. Its narrow width enables it to maneuver in tight locations not accessible by larger machines.

Contractors who are looking for a lightweight, compact unit that will maneuver in tight locations not accessible by other machines should give our Model HB19 a look. The HB19 comes in two different versions: the HB19 manual drive unit and the HB19 self-propelled unit.

The 2100 Self-Propelled

Reaching the stump as quickly and efficiently as possible and then delivering the needed power to dispose of the stump is what the Bandit 2100 is all about.

• The 2100 is compact enough to fit through a 36” gate
• The hydraulic carriage drive features individual hydraulic motors plugged into the wheels. A two wheel drive is standard.
• Low and high speed drive settings provide speed to quickly reach the stump and ample power to climb hills. the unit travels 0 -120 feet/minute or 0 - 1.3 miles/hour in the low speed setting and 0 -240 feet/minute or 0 - 2.6 miles/hour in the high speed setting.
• Positive lock drive wheels are standard.
• Heavy-duty frame provides an extremely stable grinding platform.
• Five bolt wheels and tires with an aggressive tire pattern and good flotation help this grinder quickly and efficiently reach the stump.
• All cylinder lugs feature hardened, greasable bushings.
• Large 21” diameter wheel with lots of teeth provide and efficient, smooth cut.

Popular Options

• Bandit’s quick coupled tether remote.
• Radio remote.
• 30” tongue extension improves grinding efficiency.
• Auto Feed Plus automatically backs the cutter wheel out of the cut should the engine lug to the point of stalling.
• Dual wheels provide greater flotation and increased stability on uneven ground.

The 2800 Self-Propelled

Powerful drives enable this unit to quickly reach the stump.Available with two or four wheel drive.

If you are looking for a powerful back yard stump grinder, the Model 2800 Stump Bandit is for you!

This rugged, self-propelled grinder is compact, will fit through a 36” gate and is available with a 61-HP air cooled diesel engine. The powerful undercarriage features low and high speed settings, allowing you to quickly reach the stump and providing power for climbing hills. In the low speed setting, the unit travels 0 -120 feet/minute or 0 - 1.3 miles/hour. A standard four wheel hydraulic drive system mikes it easy to propel and steer this grinder. Detachable dual wheels provide additional flotation on a 21 3/4” diameter cutter wheel with 24 teeth to insure a smooth, controlled, productive cut. All cylinder lugs feature hardened greasable bushings. Positive lock drive wheels are also standard.

A radio remote is available.

A hydrostatic cutter wheel drive simplifies this unit’s design while providing absolute control over the cutting process.

The 2800 Towable

Large 28” Diameter grinding wheel provides a smooth, efficient cut.

This economically priced unit is constructed with a direct mechanical drive in lieu of the hydrostatic drive found on the self-propelled machine.

Unlike the self-propelled unit, this towable version features a 28” diameter cutter wheel with 32 teeth ensuring a smooth, productive cut. The Model 2800 has a heavy-duty bearing pivot design providing a durable, dependable up and down and side to side pivot system.

Power options include a 61 horsepower air or water cooled diesel. Radio and tether remotes are available as options.

The 3200 Track

This unique, rubber-tracked self-propelled stump grinder is the ultimate machine for the serious stump removal contractor. It is highly maneuverable and makes stump removal quick and easy.

The CAT 303CR rubber-tracked undercarriage has the power to cover rough terrain and plenty of flotation for soft conditions. A two-speed hydraulic track drive, along with a creeper gear, provides control over power and speed.

This unit is ideal for the high production stump grinding application and is a great tool for the light land clearer as well.

The 3200 Towable

This high production, rugged stump grinder is a real work horse. A large 32” diameter x 1 1/2” thick cutting wheel with 48 teeth provides an aggressive, smooth cut of 49” above ground and 24” deep with a 97 degree swing.

This is the machine for those who want to quickly dispose of stumps. As with all Bandit Stump Grinders this unit features a heavy-duty bearing pivot design providing a durable, dependable up and down and side to side pivot system. The heavy-duty frame provides a stable grinding platform.

Radio and tether remotes are available. Swing out controls that rotate in tow directions are standard.